NR-10

 
Description

  The NR-10 features 4-port PoE+ IEEE 802.3at supplying up to 30 watts per port.


  This product can convert standard 100~240V/AC power into low-voltage DC that
runs over existing LAN cable to power up IEEE 802.3at compliant network
accessories. By adding a NR-10 to an existing network, installing networking
products such as Access Points and IP cameras can be easily managed and set
up. Wireless device deployments are easily located with available power outlets
and network administrators don’t need to use heavy AC power adapters anymore.
When connected with a PSE to its PD WAN port, the NR-10can be powered
without its external power adaptor, therefore eliminating the need to find a power
outlet for the router.

  Ethernet is the most ubiquitous networking interface in the world; virtually all
network traffic passes over multiple Ethernet links. However, the majority of
Ethernet links are idle most of the time idle, waiting for packets of data, but
consuming power at a near constant level. Energy Efficient Ethernet (EEE)
provides a mechanism and a standard for reducing this energy usage without
compromising its vital functionality

Features
  • 4 Gigabit LAN PSE ports & 1 Gigabit WAN PD port PoE+ Gateway 

  • 1 Gigabit WAN PD Port that allows NR-10 acquiring power from a PSE.

  • 4 Gigabit LAN PSE Ports that support IEEE 802.3af/at PoE, providing up to 30W per port

  • Supports IEEE 802.3az EEE (Energy Efficient Ethernet), save power while network traffic isn’t busy

  • Supports voice VLAN

  • Management features such as Max/Min Bandwidth Control, QoS, Broadcast/Multicast/Unknown Frames Storm Control

NWA220

 
Description
Specification

  The NWA220 is a high power industrial use Outdoor CPE with the next generation 802.11ac Wi-Fi standard, combined 1200Mbps Wi-Fi speed over 2.4GHz(300Mbps) and 5GHz(900Mbps).

  The NWA220 comes with ABS waterproof, dust proof and sunscreen shell, avoiding damage from dust.

  The NWA220 has a two-line Power Amplifier on the PCB board, with a maximum of 1000mW. The 18dBi MIMO high gain antenna enables a very wide WiFi range.

 

  The NWA220 has integrated IEEE802.3at Power over Ethernet (PoE), for easy installation in areas where power outlets are not readily available, eliminating the need of altering existing network infrastructure.

  • Chipset Atheros: QCA9563 + QCA9882 +QCA8035

  • Standard: 802.11ac/b/g/n, MIMO technology

  • Memory: 128MB DDR2 RAM

  • Flash: 16MB

  • Interface: 1 * 10/100 /1000Mbps RJ45 WAN Port 1 * Reset button, press 15 seconds to revert to default setting

  • Antenna Build in:18dBi Panel Antenna

  • Power consumption: 48V PoE<30W

  • Operation mode: Wireless AP, Gateway, WISP, WiFi Repeater

  • WAN Type: Dynamic IP/Static IP/PPPoE/L2TP(Dual Access) /PPTP(Dual Access) Wireless Security: 64/128-bit WEP, WPA / WPA2, WPA-PSK/ WPA2-PSK encryption

  • SSID: Multiple SSID (4 SSID for 2.4G, 4 SSID for 5.8G)

  • Firewall: DoS, SPI Firewall, IP Address Filter/MAC Address Filter/Domain Filter IP and MAC Address Binding

  • Protocols: IPv4

NRS8GP

 
Description
Specification

  8+1*10/100/1000 GB port switch with 8p PoE (96W)

  The NRS8GP is designed for residential and small commercial setups that have a need for extremely stable (PoE) switches, but do not have the demand for Enterprise grade network management or design redundancy.

  The NRS8GP is of the used in areas where noise can be a big issue. The fanless design allows the installer to deploy the switches even in Boardroom and living quarter setups. The small design of the switches avoids having to dedicate Rackspace to the switches

  • Ports: 8

  • Port Speed: FE

  • Switching Capacity: 1.6 Gbps 

  • PoE/PoE+: PoE/PoE

  • Power Budget: 96W

  • Compliance/ Certification:CW, FCC, ROHS

NRS16G

 
Description
Specification

NRS16GP

  16*10/100/1000 GB port switch 

  The NRS16G is designed for residential and small commercial setups that have a need for extremely stable (PoE) switches, but do not have the demand for Enterprise grade network management or design redundancy.

  The NRS16G is of the used in areas where noise can be a big issue. The fanless design allows the installer to deploy the switches even in Boardroom and living quarter setups. The small design of the switches avoids having to dedicate Rackspace to the switches

  • Ports: 16

  • Port Speed: Gigabit

  • Switching Capacity: 32 Gbps 

  • Compliance/ Certification:CW, FCC, ROHS

NRS16GP__85305.1501745389.jpg
 
Description

  16*10/100/1000 GB port switch with 16p PoE/PoE+ (240W)

  The NRS16GP is designed for residential and small commercial setups that have a need for extremely stable (PoE) switches, but do not have the demand for Enterprise grade network management or design redundancy.

  The NRS16GP is of the used in areas where noise can be a big issue. The fanless design allows the installer to deploy the switches even in Boardroom and living quarter setups. The small design of the switches avoids having to dedicate Rackspace to the switches.

Specification
  • Ports: 16

  • Port Speed: Gigabit

  • Switching Capacity: 32 Gbps 

  • PoE/PoE+: PoE/PoE

  • Power Budget: 240W

  • Compliance/ Certification:CW, FCC, ROHS