top of page

Blustream DA11USB has been designed to both encode 2ch USB audio to a Dante® digital signal, and decode a Dante® digital signal to 2ch USB audio.

 

The DA11USB features both USB Type-B and USB-C connections, selectable via a switch, and is a plug & play device that is powered either using PoE (Power Over Ethernet), or with 5V from the USB device. The DA11USB also supports AES67 RTP audio transport.

Blustream DA11USB | PoE Dante® USB Audio Encoder / Decoder

    • Encodes 1ch USB audio to Dante® digital signal

    • Decodes a Dante® digital signal to USB audio

    • Selectable USB audio between USB Type-B and USB-C inputs

    • Compliant with USB Audio Device Class Specification V1.0 

    • Supports  44.1 & 48 KHz sample rates @ 16 Bit

    • Configurable Dante® device latency (supports 1, 2 or 5ms configurable using Dante® Controller)

    • Supports AES67 RTP audio transport

    • Features Class 3 IEEE 802.3af PoE for powering of product from any PoE switch

    • Supports power via 5V  USB for when network switch does not support PoE

    • Audio Input Connectors: 1x RJ45, female (100Mbps Dante® network), 1x USB Type B female, 1x USB Type C female

    • Audio Output Connectors: 1x RJ45, female (100Mbps Dante® network), 1x USB Type B female, 1x USB Type C female

    • Casing Dimensions (W x H x D): 120mm x 26mm x 47mm

    • Shipping Weight: 0.3kg

    • Operating Temperature: 32°F to 104°F (0°C to 40°C)

    • Storage Temperature : -4°F to 140°F (-20°C to 60°C)

    • Power Supply: Class 3 IEEE 802.3af PoE, or 5V USB 

bottom of page