top of page
Blustream DA22XLR-WP-EU | Line / MIC 2+2 XLR Dante® Audio Wall Plate EU
The DA22XLR-WP is a multi-input / output wall plate to convert analogue audio within a digital Dante® networked audio system.
 
The DA22XLR-WP features 2 input channels of balanced / unbalanced / MIC audio with switchable 48v phantom power and 2 output channels of balanced / unbalanced audio. 
 
The DA22XLR-WP is a plug & play device that is powered using PoE (Power over Ethernet), or via 12V power supply, offers support for AES67 RTP audio transport and magnetic faceplate design allows for both UK & EU backbox compatibility.

Blustream DA22XLR-WP-EU | Line / MIC 2+2 XLR Dante® Audio Wall Plate EU

    • Dante® network wall plate interface for 2 x audio inputs and 2 x audio outputs

    • Converts 2 x balanced / unbalanced / MIC audio sources to Dante® audio channels

    • Converts 2 x Dante® audio channels to balanced / unbalanced audio outputs

    • Switchable 48V Phantom power for each MIC XLR input

    • Adjustable MIC / line sensitivity from +24dBu to -28dBV for each XLR input 

    • Adjustable line gain from +18 dBu to -10 dBV for each XLR output

    • Supports: 44.1, 48 & 96kHz sample rates @ 24 Bit

    • Configurable Dante® device latency (supports 1, 2 or 5ms configurable using Dante® Controller)

    • Supports AES67 RTP audio transport

    • Features Class 0 IEEE 802.3af PoE for powering of product from any PoE switch

    • Supports power via 12V DC adapter (not included) for when network switch does not support PoE

    • Magnetic faceplate surround allowing for both UK & EU backbox compatibility

    • Audio Input Connectors: 2 x Analogue balanced/unbalanced 3-Pin XLR connector 

    • Audio Output Connectors: 2 x Analogue balanced/unbalanced 3-Pin XLR connector

    • Network Connectors: 1 x PoE Dante® Ethernet Connection (RJ45)

    • Configuration Switches: 4 x 5 position rotary dials (Sensitivity / Gain), 2 x Push button (48V Phantom power)

    • Firmware  Upgrade: 1 x Micro-USB UART port

    • Module Dimensions (L x W x H): 136mm x 76mm x 45mm (without faceplate)

    • Faceplate Dimensions (L x W x H): 146mm x 86mm x 5mm

    • Cut Out Dimensions (L x W x H): 109mm x 50mm x 36mm

    • Mounting Hole Spacing: UK 121mm CTC, EU 60mm CTC

    • Backbox Requirements: UK double gang backbox / EU double gang backbox

    • Shipping Weight: 0.6kg

    • Operating Temperature: 32°F to 104°F (0°C to 40°C)

    • Storage Temperature: - 4°F to 140°F (- 20°C to 60°C)

    • Power Supply: Class 0 IEEE 802.3af PoE or 12v/1A DC 2-Pin Phoenix connector

bottom of page