top of page
Blustream UEX100E-KIT | USB 2.0 HDBaseT™ Extender Set
The UEX100E-KIT is a USB extender kit utilising HDBaseT™ technology to extend USB 2.0 data, 2ch analogue audio, and control signals up to 100m over a single CAT cable. 
The UEX100E-KIT allows up to 4x USB devices to be connected to a single USB host with support for a combined transmission data bandwidth of up to 480Mbps, and is backwards compatible with USB 1.1 devices. 
The UEX100E-KIT also provides bi-directional Power over Cable (PoC), bi-directional IR, RS-232, 2ch analogue audio, and 100Mbps Ethernet/LAN pass through.

Blustream UEX100E-KIT | USB 2.0 HDBaseT™ Extender Set

    • Extends USB up to a distance of 100m over a single CAT cable using HDBaseT™ technology*

    • Supports USB 2.0 signal extension

    • Backwards compatible with USB 1.1 devices

    • Transmitted data bandwidth up to 480Mbps (combined)

    • 1 x USB-B port on the receiver for connection to host device

    • 4 x USB-A ports on transmitter for connection to devices

    • USB-A ports 1-2 support 5V 1A, USB-A ports 3-4 support 5V 500mA

    • Bi-directional Ethernet pass-through (100Mbps)

    • Bi-directional IR & RS-232 pass through

    • Supports 2ch PCM Analogue Audio pass through (direction selectable)

    • Bi-directional PoC (Power over Cable) to power extenders from either the transmitter or receiver

    • Simple plug and play, no driver installation or setup required

      *Signal distribution length subject to length of device / host USB cables and CAT cable type

  • UEX100E-RX

    • CAT Connector: 1 x RJ45 connector, female

    • USB Port: 1 x USB-Type B

    • Audio Input/Output Connector: 1x Analogue L/R audio (3.5mm stereo jack)

    • Ethernet Port: 1 x RJ45 connector, female

    • RS-232 Serial Port: 1 x 3-pin Phoenix connector

    • IR Input Ports: 1 x 3.5mm stereo jack

    • IR Output Ports: 1 x 3.5mm mono jack

    • Config Switch: 2-pin DIP switch

    UEX100E-TX

    • CAT Connectors: 1 x RJ45 connector, female

    • USB Ports: 4 x USB-Type A

    • Audio Input/Output Connector: 1x Analogue L/R audio (3.5mm stereo Jack)

    • Ethernet Port: 1 x RJ45 connector, female

    • RS-232 Serial Port: 1 x 3-pin Phoenix connector

    • IR Input Ports: 1 x 3.5mm stereo jack

    • IR Output Ports: 1 x 3.5mm mono jack

    • Config Switch: 2-pin DIP switch

     

    • Power Supply: 24V/1.25A DC

    • Product Dimensions (W x D x H ):  150mm x 100mm x 25mm (TX/RX)

    • Shipping Weight: 1.6kg

    • Operating Temperature: 32°F to 104°F (-5°C to +55°C)

    • Storage Temperature: -4°F to 140°F (-25°C to +70°C)

bottom of page