The DA11ABL-WP is a multi-input / output wall plate to convert Bluetooth and analogue audio within a digital Dante® networked audio system. The DA11ABL-WP converts 2 x input channels of Bluetooth, or unbalanced audio to Dante® digital audio, and 2 x channels of Dante® audio to 2 x output channels of unbalanced audio. Software configuration for the DA11ABL-WP allows for the Bluetooth name to be amended as required where being deployed in multi-user spaces.
The DA11ABL-WP is a plug & play device that is powered using PoE (Power over Ethernet), or via 12V power supply, offers support for AES67 RTP audio transport, and magnetic faceplate design allows for UK / EU backbox compatibility. The DA11ABL-WP is the ideal BYOD interface to allow any Bluetooth device to stream audio wirelessly to a Dante® audio system.
DA11ABL-WP-EU | Bluetooth & Analogue Audio Dante® Wall Plate EU
-
Dante® network wall plate interface for Bluetooth and analogue L/R audio inputs, and L/R audio outputs
-
Converts 2ch Bluetooth, or un-balanced audio sources to Dante® audio
-
Converts 2x Dante® audio channels to un-balanced audio outputs
-
Configurable Bluetooth naming allows for simple discovery of the unit
-
Adjustable input sensitivity from +24dBu to -28dBV via control software
-
Adjustable output gain from +20dBu to -28 dBV via control software
-
Supports: 44.1, 48 & 96kHz sample rates @ 16, 24 or 32 Bit
-
Configurable Dante® device latency (supports 1, 2 or 5ms configurable using Dante® Controller)
-
Supports AES67 RTP audio transport
-
Features Class 0 IEEE 802.3af PoE for powering of product from any PoE switch
-
Supports power via 12V DC adapter (not included) for when network switch does not support PoE
-
Magnetic faceplate surround allowing for connection to both UK / EU backboxes
-
-
Audio Input Connectors: 1 x Analogue Left / Right audio (3.5mm stereo jack)
-
Audio Output Connectors: 2 x Analogue RCA (Left / Right)
-
Network Connectors: 1 x PoE Dante® Ethernet Connection (RJ45)
-
Bluetooth: Bluetooth V5.0 - SBC / MP3 / AAC / APT-X / APTX-LL / APTX-HD, 44.1K-48KHz 16 / 24Bit
-
Configuration Switches: 1 x Push button (connect / selection)
-
Firmware Upgrade: 1 x Micro-USB UART port
-
Overall Module Dimensions (W x H x D): 74mm x 74mm x 50mm (without faceplate)
-
Faceplate Dimensions (W x H x D): 85mm x 85mm x 5mm
-
Cut Out Dimensions: 52mm x 55mm
-
Mounting Hole Spacing: UK 60mm CTC, EU 60mm CTC
-
Backbox Mounting Depth: 40mm (minimum), 47mm (recommended), UK or EU single gang
-
Shipping Weight: 0.3kg
-
Operating Temperature: 32°F to 104°F (0°C to 40°C)
-
Storage Temperature: - 4°F to 140°F (- 20°C to 60°C)
-
Power Supply: Class 0 IEEE 802.3af PoE or 12v/1A DC 2-Pin Phoenix connector
-