top of page
Nanpeng Group

Blustream IP300UHD Video Over IP - Deliver 4K 60Hz 4:4:4 over a 1Gb network


Blustream is pleased to announce the launch of the latest IP300UHD Video over IP platform. For the first time we can cost effectively specify 4K 60Hz 4:4:4 over a 1Gb network.


The Blustream IP300UHD Video over IP platform allows virtually latency free (1 frame) distribution of 4K 18Gbps HDMI video over a 1Gb managed network. The IP300UHD is an industry leading 4K HDCP 2.2 HDMI platform that, using visually lossless compression technology, delivers 18Gbps HDMI, audio, bi-directional IR, RS-232 & USB/KVM up to lengths of 100m over standard copper network architecture, or greater distances using the in-built fibre SFP network interface. The IP300UHD features a second RJ45 LAN port for daisy chaining the HDMI signal onto further IP300UHD units.



With a full 18Gbps HDMI scaling chipset on-board, the HDMI output can be adjusted to lower resolutions where legacy displays are required in the same system as full 4K. The scaling capabilities of this unit also allow for videowalls to be created where required. The units can be powered via PoE from the network switch, or locally should the switch not support PoE. With multiple configuration options available, the flexibility of the Blustream IP300UHD platform makes this product ideal for the majority of installation environments.


Contact us today for more information.


Key Features

  • Advanced 4K HDMI 2.0 video over 1Gb managed network supporting 18Gbps HDMI signals

  • Virtually unlimited system size

  • Extends HDMI up to a distance of 100m over a single CAT cable

  • SFP port for signal distribution over fibre

  • Features 1 x HDMI loop-out for integrating local displays or cascading to multiple devices

  • Supports up to 4K UHD 60Hz 4:4:4

  • Supports HDR including Dolby Vision LLM

  • Supports all known HDMI audio formats including Dolby Atmos, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio transmission

  • Advanced signal management for independent routing of IR, RS-232, USB/KVM, audio and video

  • PoE (Power over Ethernet) to power Blustream unit from PoE switch

  • HDCP 2.2 compliant with advanced EDID management

  • Audio breakout to optical (S/PDIF) and analogue L/R audio outputs, supporting both balanced and unbalanced audio signals

  • Balanced/unbalanced analogue audio input for replacing the HDMI embedded audio with a different audio signal

  • OLED front panel display for advanced system information and manual configuration

  • Optional 24V power supply (should Ethernet switch not support PoE)

  • Compatible with Blustream IP300UHD-RX and IP350UHD-TX/RX products


0 comments

Comments


bottom of page